Autowatch Ghost Installation
Autowatch Ghost is a revolutionary immobiliser system that protects against key-cloning, hacking, and vehicle theft. It could lower your insurance premiums and you could be eligible for incentives.
The Ghost immobiliser that is discreet and simple to operate, is integrated into the ECU of the vehicle. This makes it impossible for the engine to be started without a secret code.
TASSA Approved
If you want to prevent your vehicle from being stolen with key cloning then you should purchase the TASSA certified Autowatch Ghost immobiliser system. This is the latest in car security technology and thwarts thieves two ways - it can stop your car from starting if your keys are copied and stops you from driving away if thieves have stolen your existing key fobs.
The Ghost is the next generation and is connected to the CAN data network of your vehicle. A personal PIN code can be entered using the standard buttons on the dashboard, or on the steering wheel. The Ghost will stop the engine from starting. It can be programmed using a variety of settings such as Gear Change Blocking (vehicle-dependent), Stall on Start (vehicle-dependent) or Lock Gearbox. It is completely undetectable and doesn't utilize radio frequency signals, so that it is not identified by RF scanning equipment or a code grabber.
The Ghost is a weatherproof, tiny device that is fully sealed so that it can be concealed in the vehicle or placed on the dashboard, where it is virtually impossible for thieves to find. Unlike other alarm and immobiliser systems on the market, this one is not a Thatcham Category approved product, but is recognised by insurance companies as an effective anti-theft system. It comes with a 5 year warranty.
The TASSA verification process guarantees that any installation work performed on the Ghost will be done so by a qualified and experienced installer. This gives the customer's, insurers' and police's confidence in the quality of the installation. It also guarantees that the installers adhere to the manufacturer's instructions and set up the product correctly. Installers who are TASSA members are committed to excellence and desire to make a difference in the fight against criminality.
Compatible with a wide range of vehicles
The Autowatch Ghost 2 is a modern immobiliser designed to protect your vehicle from modern-day key copying. Its PIN code system has been integrated into the ECU of your car, making it more difficult for thieves to clone keys or hack into the vehicle's system. The device is also discrete and can easily be installed in many vehicles such as minivans and sports cars. It's also weatherproof and small enough to hide away from view making it harder for thieves to spot.
Installation of the Ghost is easy and doesn't require any additional wiring. It is compatible with numerous vehicles and communicates using the vehicle's data network CAN. It is also able to be deactivated or switched off from the main screen of the vehicle. The device is compatible with many applications on mobile devices that allow you to manage the security of your vehicle remotely.
The Ghost may have some issues after installation, despite its numerous advantages. These issues can be caused by a variety of causes, such as faulty wiring or an uncompatible mobile app. In these instances, calling an expert installer is the best approach to solve the issue.
Another issue faced by users is difficulty entering the Ghost's disarm sequence. This is usually due in part to forgetting the correct sequence or not rehearsing it. However, the device's manual provides an emergency code that can be used in the event of such issues.
Distinction
Autowatch Ghost is a discreet and sophisticated security system that protects your vehicle from theft. This device is unnoticeable to thieves and uses the CAN data network of your vehicle to function. It is also able to be activated by other security systems, such as car alarms, and also provides real-time alerts for calls to the owner. These features can help police in finding your vehicle if it is stolen.
This system is compatible with the majority of vehicles and can be set up in under an hour. It's an aftermarket device TASSA-approved that works with vehicle trackers and even recognized by a few insurance companies. It's also tamper-proof and silent, so criminals won't be hearing it operate. In addition it can be programmed to require a Ghost immobiliser can be programmed to require a PIN number that can be as long as 20 digits which is almost impossible to guess.
Ghost is only available only when the vehicle is in the Service/Valet Mode. This means that you aren't giving the PIN number to a mechanic or another person who may need access to your vehicle's computer system. The Ghost comes with five-year guarantee.
The Autowatch Ghost is an innovative immobiliser that can stop key cloning as as ECU hacking and car theft. It's an aftermarket CAN bus device that's an excellent option for new and older vehicles. It's easy to install, and it runs quietly. This makes it possible to be used in any car without cutting wires. You can also change your pin with ease so that only you know it. It also doesn't employ RF scanning or code-grabbing technology which means it's nearly inaccessible.
Easy to use
Autowatch Ghost is a highly efficient and innovative security system that disables the engine to stop vehicle theft. It is operated by the personalization of a code by the vehicle owner. The code must be entered to allow the car to begin. This technology is extremely advanced and enhances the overall safety of your vehicle and is a favorite option for many motorists. However, executing this installation requires careful preparation and attention to detail. This includes checking compatibility and using a professional's knowledge, adhering legal regulations, as well as gaining an understanding of the Ghost II's operating dynamics. The importance of these aspects will ensure a successful installation and optimal functionality.
Contrary to other systems The Ghost II is silent and is not able to be detected by thieves. It is also weatherproof and compact and compact, making it hard to gain entry into your vehicle. It is also compatible with CAN and Lenastark, which permits it to be fitted in various vehicles. It can even be used in vehicles where the battery needs to be isolated to ensure maintenance. The Ghost 2 also has a Transport Mode, which disables the device when your car is being loaned or rented out.
Before starting the Ghost 2, you will have to enter a PIN code that is unique to you. Installers will set up a default code, but it is recommended to change it as soon as possible for your own security. The device can go into sleep mode to save the battery, however when it detects any signal from the engine management system it will wake up and stop the vehicle from beginning. This feature can be turned off in the Settings menu. It is best to utilize the Ghost immobiliser only when your vehicle is moving and to lock it every time you leave the vehicle unattended.
Easy to install
ghost immobiliser tracker g28carkeys , an advanced security system, deters car thefts by removing a vehicle's engine. It works by using a code that is unique to the owner of the vehicle, which makes it a powerful deterrent. Installing this device requires a lot of attention to detail and meticulous preparation. By following legal regulations and adhering to the law, and relying on the expertise of experts, you can ensure that the installation process is smooth and you get the most benefit of this security system.
This innovative CANbus immobiliser from Autowatch is simple to install, and operates quietly, so that criminals can't hear it working. It utilizes CAN bus communication to communicate with the vehicle. It is compatible with a large variety of vehicles. It's a major breakthrough in the field of vehicle security. It protects you from key cloning and theft from your vehicle. It is small and weatherproof, making it hard for criminals to alter or spot.
To begin working with your Ghost Immobiliser, you need to look up the wiring diagram of your vehicle and find the CAN high (CAN H) and low (CAN L) wires. Connect the CAN high and low wires to the ECU. These wires can be found under the dashboard or close to the engine.
It is recommended to employ a certified and trusted installer for the installation of your Ghost immobiliser. You can be sure that the system will be installed correctly and won't interfere in the vehicle's operation. The installer will also be able provide tips on how to make use of your new device.